1 motorola thyristor device data
reverse blocking triode thyristors . . . pnpn devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. ? passivated surface for reliability and uniformity ? power rated at economical prices ? practical level triggering and holding characteristics ? flat, rugged, thermopad construction for low thermal resistance, high heat dissipation and durability ? recommended electrical replacement for c106 maximum ratings (t j = 25 c unless otherwise noted.) rating symbol value unit *repetitive peak forward and reverse blocking voltage (1) (1/2 sine wave) (r gk = 1000 ohms, t c = 40 to +110 c) v drm or v rrm 400 volts *nonrepetitive peak reverse blocking voltage (1/2 sine wave, r gk = 1000 ohms, t c = 40 to +110 c) v rsm 450 volts *average onstate current (t c = 40 to + 90 c) (t c = +100 c) i t(av) 2.6 1.6 amps *surge onstate current (1/2 sine wave, 60 hz, t c = +90 c) (1/2 sine wave, 1.5 ms, t c = +90 c) i tsm 25 35 amps circuit fusing (t = 8.3 ms) i 2 t 2.6 a 2 s *peak gate power (pulse width = 10 m s, t c = 90 c) p gm 0.5 watts *indicates jedec registered data. (continued) 1. v drm and v rrm for all types can be applied on a continuous basis. ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. order this document by 2n6240/d semiconductor technical data ? motorola, inc. 1999
case 77-08 (to-225aa) style 2 scrs 4 amperes rms 400 volts k a g a k a g
2 motorola thyristor device data maximum ratings e continued (t j = 25 c unless otherwise noted.) rating unit value symbol *average gate power (t = 8.3 ms, t c = 90 c) p g(av) 0.1 watt peak forward gate current i gm 0.2 amp peak reverse gate voltage v rgm 6 volts *operating junction temperature range t j 40 to +110 c *storage temperature range t stg 40 to +150 c mounting torque (1) ? 6 in. lb. thermal characteristics characteristic symbol min max unit *thermal resistance, junction to case r q jc e 3 c/w thermal resistance, junction to ambient r q ja e 75 c/w *indicates jedec registered data. electrical characteristics (t c = 25 c and r gk = 1000 ohms unless otherwise noted.) characteristic symbol min typ max unit * peak forward or reverse blocking current (v ak = rated v drm or v rrm )t c = 25 c t c = 110 c i drm , i rrm e e e e 10 200 m a m a *peak forward aono voltage (i tm = 8.2 a peak, pulse width = 1 to 2 ms, 2% duty cycle) v tm e e 2.2 volts gate tri gger current (continuous dc) (2) (v ak = 12 vdc, r l = 24 ohms) *(v ak = 12 vdc, r l = 24 ohms, t c = 40 c) i gt e e e e 200 500 m a gate tri gger v oltage (continuous dc) (source voltage = 12 v, r s = 50 ohms) *(v ak = 12 vdc, r l = 24 ohms, t c = 40 c) v gt e e 1 volts gate n ontrigger v oltage (v ak = rated v drm , r l = 100 ohms, t c = 110 c) v gd 0.2 e e volts holding current (v ak = 12 vdc, i gt = 2 ma) t c = 25 c *(initiating onstate current = 200 ma) t c = 40 c i h e e e e 5 10 ma *total turnon time (source voltage = 12 v, r s = 6 k ohms) (i tm = 8.2 a, i gt = 2 ma, rated v drm ) (rise time = 20 ns, pulse width = 10 m s) t gt e 2 e m s forward voltage application rate (v d = rated v drm , t c = 110 c) dv/dt e 10 e v/ m s *indicates jedec registered data. 1. torque rating applies with use of compression washer (b52200f006 or equivalent). mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. anode lead and heatsink contact pad are common. (see an209 b) for soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200 c. for optimum results an activated flux (oxide removing) is recommended. 2. measurement does not include r gk current.
3 motorola thyristor device data dc 106 82 94 110 102 98 0 0.8 1.6 2.4 3.2 90 4.0 i t(av) , average forward current (amp) 86 90 50 30 110 figure 1 maximum case temperature 0 figure 2 maximum ambient temperature i t(av) , average forward current (amp) 0.1 0.2 0.3 0.4 180 90 60 a = 30 dc c t , maximum allowable case temperature ( c) a t , maximum allowable ambient 0.4 1.2 2.0 2.8 3.6 a 0 p f = 60 hz 120 70 0.5 0.6 0.7 0.8 180 90 60 a = 30 a 0 p f = 60 hz temperature ( c)
4 motorola thyristor device data package dimensions notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. style 2: pin 1. cathode 2. anode 3. gate b a m k f c q h v g s d j r u 13 2 2 pl m a m 0.25 (0.010) b m m a m 0.25 (0.010) b m dim min max min max millimeters inches a 0.425 0.435 10.80 11.04 b 0.295 0.305 7.50 7.74 c 0.095 0.105 2.42 2.66 d 0.020 0.026 0.51 0.66 f 0.115 0.130 2.93 3.30 g 0.094 bsc 2.39 bsc h 0.050 0.095 1.27 2.41 j 0.015 0.025 0.39 0.63 k 0.575 0.655 14.61 16.63 m 5 typ 5 typ q 0.148 0.158 3.76 4.01 r 0.045 0.055 1.15 1.39 s 0.025 0.035 0.64 0.88 u 0.145 0.155 3.69 3.93 v 0.040 1.02 case 7708 (to225aa) motorola reserves the right to make changes without further notice to any products herein. motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. atypicalo parameters which may be provided in motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. motorola does not convey any license under its patent rights nor the rights of others. motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the motorola product could create a situation where personal injury or death may occur. should buyer purchase or use motorola products for any such unintended or unauthorized application, buyer shall indemnify and hold motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that motorola was negligent regarding the design or manufacture of the part. motorola and are registered trademarks of motorola, inc. motorola, inc. is an equal opportunity/affirmative action employer. mfax is a trademark of motorola, inc. how to reach us: usa / europe / locations not listed : motorola literature distribution; japan : motorola japan ltd.; spd, strategic planning office, 141, p.o. box 5405, denver, colorado 80217. 13036752140 or 18004412447 4321 nishigotanda, shinagawaku, tokyo, japan. 81354878488 customer focus center: 18005216274 mfax ? : rmfax0@email.sps.mot.com touchtone 1 6022446609 asia / pacific : motorola semiconductors h.k. ltd.; silicon harbour centre, motorola fax back system us & canada only 18007741848 2, dai king street, tai po industrial estate, tai po, n.t., hong kong. http://sps.motorola.com/mfax/ 85226629298 home page : http://motorola.com/sps/ 2n6240/d ?
|
